View Categories

LCD upgrade kit for your SINGLE 9″ Hurco Autobend, Teletube Electronics, Ultimax BMC 30 CRT includes MK063 – M21A01-ML080QTAUTOS

1 min read

Table of Contents

What’s In This Install Guide?
This guide will walk you through the steps of installing and using the LCD upgrade kit for your SINGLE 9″ Hurco Autobend, Teletube Electronics, Ultimax BMC 30 CRT includes MK063 – M21A01-ML080QTAUTOS. You’ll find out how to use the device, where it can be used, and how to use it effectively.

Who Is This Guide For?
This install guide is designed for anyone who needs to use and or install the LCD upgrade kit for your SINGLE 9″ Hurco Autobend, Teletube Electronics, Ultimax BMC 30 CRT includes MK063 – M21A01-ML080QTAUTOS. It’s also designed for anyone who wants to learn more about this product by reading through it.
IMPORTANT: WARRANTY

Before using any MONITECH product, please carefully review this Manual as well as any additional documentation provided with your shipment.

Attempting any of the following will void product warranty:

  • Unauthorized repairs or parts replacement
  • Inappropriate use or placement: exposing the product to liquids, harmful gases, electrical shock, physical shock, temperatures beyond the range of -4°F to 140°F (-20°C to 60°C)
  • Use of electrical voltage other than 12V 4.16A (power supply and AC cable provided)
  • Removal or modification of serial, product, or warranty labels.

REMOVAL: #

  • Step #1) Turn off main power, turn off machine.
  • Step #2) Take the back cover off the HMI. Remove the screws shown, keep the screws removed for re-installation.
    To see the CRT and controller, you must remove the back panel by unscrewing the screws holding it.
  • Step #3) This is what you got. Unscrew the fasteners holding the CRT in the frame of the HMI, keep the screws for re-installation. Unplug the power & video cable off the driver board. Remove both the CRT & the driver board from the HMI frame.

INSTALLATION: #

  • Step #1) Put Monitech’s Monitor in the housing using the four screws previously holding the CRT in place.
    With the screwdriver, fasten the 4 screws to attach the new Monitech monitor on these 4 holes.
  • Step #2) Open up your MK063 box, get MAV043. Plug the VGA into the Monitech Monitor and tighten the screws. Then plug your video cable from your machine into our adapter (MAV043). Plug in the power jack from MAV043 into the monitor.IF YOU HAVE A WHITE CONNECTOR USE MAB417, FOLLOW THE MPCB003 INSTALL GUIDE.
  • Step #3) Before mounting the HMI back into the machine, turn on power and main power to test the monitor. If video is on, use the user guide to adjust the screen. Then mount the HMI back into the machine.


Download

Powered by BetterDocs