12.1″ LED backlight replacement for NEC 121PW181 CCFL bulbs and inverter. For more info please contact us.
LCD part numbers that can be replaced:
-NEC NL10276BC24-13
-NEC NL10276BC24-13C
-NEC NL8060BC31-27
-NEC NL8060BC31-27D
-NEC NL8060BC31-28D
-NEC NL8060BC31-32
-NEC NL8060BC31-41D
-NEC NL8060BC31-42
-NEC NL8060BC31-42D
Controller: SIEMENS 6AV7723-2AA/0-0AD0
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
Monitech Panelview 1000e double strip LED backlights is the perfect replacement solution for the OEM 2711-NL10 & 2711-NL6 bulbs. The original metal casing with the low voltage twice as bright LED lamps make it very easy to slide in the new backlights into place.
DOES NOT WORK FOR REV B, FOR REV B USE MB1000LED 10″ LED SHEET
WORKS FOR:
AB CONTROLLER #: 2711E-K10C8, SER D, REV A
LCD#: SHARP LQ104V1DG11
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
This 10 inch LED backlight will replace the CCFL bulbs inside
- Sharp LQ121S1LG55,
- Sharp LQ121S1LG45 and
- Sharp LQ121S1DG41 LCD panels
We also carry the LCD upgrade kits for the above LCD panels.
Please contact us if you do not see your specific panel here.
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
Double backlight strips for Cutler-Hammer 1785T controller with 9M99 1700 L shaped lights. 170 MM AND 135 MM
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
You only need 2 bulbs to repair your backlight in Panelview 600 controller (2711-NL3). The 3rd CCFL light is yours to keep in case 1 breaks or burns out. Needs soldering.
3 x U-shaped CCFL bulbs for Allen Bradly Panelview 600 with Keypad (2711-K5) and Keypad + Touch (27711-B5) versions. (Buy 2 bulbs and get 1 spare bulb free)
These are BULBS ONLY, You have to solder them in place. We also sell the easy to install CCFL backlight bulbs already assembled to the caddie, Please Contact Us
Youtube installation video.
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
10.4 inch LED backlight strip replacement for Samsung LTA104S2-L01. Easy to install, Monitech high quality product.
To see our full lineup of back lights, please Click Here.
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
LED backlight strip for Allen-Bradley Panelview 1000 for 2711-T10C15 (SER E & F ONLY). Controller board 77144-777-51, 77144-293.
This Innovative design allows you to easily change your old LCD backlight with Monitech’s new LED backlight. With this design there is no need to mess around with inverters simply plug your new MB1000LEDS-EF board into your controller, where the LCD panel plugs in, and slide the LED strip into the LCD panel and you are finished.
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
PanelView Plus 1000 Terminal # 2711PC-T10C4D1 Series A, LED back-light strip. LCD#: NEC NL6448BC33-64R
This Backlight is ONLY for Newer Display modules of PanelView Plus 700 thru 1500 are LED Series Displays, and only firmware versions 5.10.11 or later are supported (Refer to LED Display Modules Installation Instructions, Publication Number 2711P-IN030, for full details. You can follow 25776 – PanelView Plus Firmware Upgrade Wizard (FUW) Utility for the firmware update)
For installation video please click here.
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
DOUBLE STRIP LED BACKLIGHT replaces 2711-NL10.
DOUBLE STRIP LED BACK LIGHT REPLACES 2711-NL10 & 2711-NL6
ENCASED IN METAL. DOES NOT WORK FOR REV B, FOR REV B USE MB1000LED (10″ LED SHEET)
WORKS FOR:
AB CONTROLLER #: 2711-K10C8, SER B, REV D
LCD#: SHARP LQ104V1DG11
| Are you in US and worried about cross-border shipments? Purchase conveniently through our trusted partners.
|
Bruce H – South Carolina. Hi there. I just installed my Allen Bradley LED lamp module and I am really happy with it. I did find a curious thing I had to fix with it. The locking collar that clamps the fiber optic in place was rotated with the set screw pointing at the mounting […]
