News and Updates
If you’re still running a CNC machine with the original Fagor 8025 CRT monitor, you’re probably already dealing with display issues. Whether it’s fading contrast, constant flickering, or a total blackout, CRTs are simply no match for the demands of a modern shop floor.
Here’s what I see most commonly with these units:
For any CNC owner, this is more than a nuisance. It’s downtime. And downtime costs money.
The Easy-to-Install Fix: Monitech’s Fagor 8025 LCD Upgrade Kit
Luckily, there’s a simple, proven solution. Monitech’s Fagor 8025 LCD Upgrade Kit with Keypad Overlay is an all-in-one replacement designed to fit perfectly into your existing machine setup.
With this upgrade kit, you get:
You can also view or download the full installation guide here:
https://monitech.com/knowledgebase/install-guides/fagor-8025-lcd-install-guide-ml064ct8025s/
Recommended Placement for Before/After Image:
Place a side-by-side “Before and After” photo of the control panel directly below this section. This visually reinforces how clean and professional the finished upgrade looks.
Buy Direct from Monitech
You can order the Fagor 8025 LCD Upgrade Kit with keypad overlay here:
https://monitech.com/products/fagor-8025-lcd-upgrade-kit-with-keypad-overlay/
All units are tested in-house before shipping. We also offer fast turnaround on orders across North America.
Case Study: A Fabrication Shop Back in Action
A fabrication shop reached out after their Fagor 8025 display gave out mid-production. They had work queued for a major project but couldn’t move forward until the display issue was resolved.
They placed an order for the Monitech Fagor 8025 LCD Upgrade Kit with the keypad overlay. The technician on-site installed the new LCD and overlay in under an hour using our printed instructions. Once powered on, the control booted perfectly and display clarity was better than they had seen in years.
The overlay gave the control panel a like-new finish and more importantly, they were able to finish their backlog with zero loss in programming or functionality.
Frequently Asked Questions
Q: Is this a universal LCD?
A: No, it’s specifically designed for the Fagor 8025 controller with exact connector and form factor matching.
Q: Do I need to modify my machine?
A: Not at all. It’s an easy-to-install drop-in replacement.
Q: Will it affect control logic or stored programs?
A: Absolutely not. This kit only replaces the CRT display. It does not interfere with programming or control boards.
Q: What if I need installation help?
A: You can refer to our installation guide or contact our team for expert support. We also offer repair services if needed:
https://monitech.com/services/repair-services/
Conclusion
The Fagor 8025 LCD Upgrade Kit with keypad overlay is one of the fastest, most cost-effective ways to keep your CNC machines running strong. Instead of chasing down rare CRT parts or risking downtime, install Monitech’s proven upgrade kit and get back to work with confidence.
It’s fast. It’s reliable. And it’s field-tested.
Need Repairs or a Custom CNC Display?
Monitech is more than just LCD kits. We also provide:
Reach out today and let’s get your equipment performing like new.
Read More Updates
NEED TO REPLACE YOUR DISPLAY?
We have a wide-range of industrial display replacement that fits on your industrial machine.