Fagor 800T LCD Upgrade Kit: A Reliable Fix for Your Aging CRT Display

When Your Fagor 800T Screen Fails, Every Second Counts

If you’re a maintenance engineer, repair technician, or automation specialist, you already know the headache that comes with a failing Fagor 800T CRT screen.

✅ The screen starts flickering…
✅ It dims to the point where you’re squinting to read it…
✅ Or worse, it dies completely, leaving you scrambling for a fix.

And let’s be real—finding a replacement CRT isn’t easy. These screens have been out of production for years, and sourcing used parts is costly, unreliable, and not a long-term fix.

So, what’s the solution? Upgrading to a modern LCD display that fits seamlessly into your existing system.

That’s exactly what Monitech’s Fagor 800T LCD upgrade kit is designed for.

Why CRT Displays Fail (and Why You Need to Upgrade)

The Fagor 800T HMI system was designed to last, but like all industrial equipment, its CRT screen has a limited lifespan. Here’s why:

Dim or Unreadable Display

Over time, the phosphors inside the CRT degrade, making the screen progressively harder to read.

Screen Flickering or Image Ghosting

Burn-in, fading text, and erratic flickering are all signs that the CRT is on its way out.

CRT Technology is Obsolete

You can’t just walk into a store and buy a new CRT anymore. As they become harder to find, repair costs skyrocket, and downtime drains productivity.

CRT Displays Consume More Power

These old screens are energy hogs. An LCD upgrade uses less power, generates less heat, and lasts significantly longer.

Monitech’s Fagor 800T LCD Upgrade Kit

8-inch Fagor 800T LCD Upgrade Kit

Monitech’s LCD upgrade kit replaces your outdated CRT screen with a modern, durable, and easy-to-install LCD display.

Why Choose This LCD Upgrade?

✅ Exact Fit for the Fagor 800T – No need for custom fabrication or modifications.
✅ Durable Industrial-Grade LCD – Built for factory environments.
✅ Lower Power Consumption – Runs cooler and lasts longer than a CRT.
✅ Easy Installation – While not plug-and-play, the kit is designed for a straightforward installation process.

This kit is designed for professionals who need a cost-effective and permanent replacement without dealing with system reprogramming or expensive OEM parts.

How to Install the Fagor 800T LCD Upgrade Kit

Upgrading from a CRT to an LCD isn’t as intimidating as it sounds. You just need a basic toolkit and about an hour of time.

What You’ll Need:

✔ Monitech’s Fagor 800T LCD Upgrade Kit
✔ A screwdriver (Phillips & flathead)
✔ Basic electrical knowledge (nothing too complex, just handling connectors)

Step-by-Step Installation Guide

1️⃣ Power Down the Machine

Before doing anything, turn off the power and unplug the system to prevent electrical hazards.

2️⃣ Open the Enclosure

• Locate the CRT monitor housing.
• Unscrew the panel to access the monitor.

3️⃣ Remove the Old CRT Monitor

• Carefully disconnect the power and signal cables attached to the CRT.
• Unscrew the mounting brackets and lift the CRT out of the enclosure.
• Handle with care—CRTs are fragile and contain high-voltage components.

4️⃣ Install the New LCD Display

• Position the Monitech LCD upgrade into the same mounting area as the CRT.
• Secure it using the included mounting brackets.
• Connect the signal and power cables to the new LCD.

5️⃣ Power Up & Test

• Double-check all connections.
• Turn on the machine and verify that the LCD displays correctly.
• If needed, adjust the brightness and contrast settings for optimal visibility.

That’s it! Your Fagor 800T now has a clear, reliable, and long-lasting LCD display.

Real-World Case: A Manufacturer’s Quick Fix with Monitech’s LCD Upgrade

A food packaging plant running multiple CNC machines with Fagor 800T HMIs faced a critical issue:

One of their machines shut down overnight due to a dead CRT display.
The technician had no replacement parts available and couldn’t afford a week of downtime.
They needed a fast, reliable solution—without overhauling the entire system.

They ordered Monitech’s Fagor 800T LCD Upgrade Kit.

Installation took just under an hour.
No major modifications were required—just swapping out the CRT and connecting the LCD.
The machine was back in operation by the end of the shift.

Now, they’ve started proactively upgrading their entire line to avoid future failures.

Where to Buy the Fagor 800T LCD Upgrade Kit

You can get your Fagor 800T LCD upgrade kit directly from Monitech:

Order Now

✔ Fast shipping
✔ Industrial-grade quality
✔ Backed by Monitech’s expertise

Monitech’s Additional Repair & Custom Solutions

Need more than just a replacement screen? Monitech also offers:

Repair Services – Professional repairs for HMIs, LCDs, and industrial displays.
Custom Solutions – Need a unique solution? Monitech can custom-build an LCD upgrade for your system.

Frequently Asked Questions (FAQ)

❓ Is this LCD upgrade plug-and-play?

No, but installation is straightforward. If you can replace a CRT, you can install this LCD kit.

❓ Will I need to modify my machine?

No, the LCD upgrade kit is designed to fit into the existing CRT mounting space.

❓ How long does installation take?

For most technicians, about an hour from start to finish.

❓ Can I use this LCD upgrade in a harsh environment?

Yes! Monitech’s industrial-grade LCD is built to handle heat, dust, and vibration.

❓ What if I need help during installation?

Monitech offers technical support to guide you through the process.

Final Thoughts: Upgrade Your Fagor 800T CRT Before It Fails

If your Fagor 800T CRT is showing signs of failure, don’t wait for a breakdown. Upgrading to an LCD display now means:

✔ No more screen flickering or dimming
✔ A reliable, long-lasting replacement
✔ Easy installation with no major modifications

Get your Fagor 800T LCD Upgrade Kit today!