TL;DR Allen Bradley PanelView terminals from the 1990s and 2000s have three replacement paths: OEM Rockwell parts, aftermarket replacements, or used/refurbished units. For most facilities, aftermarket replacements offer the best balance of cost, availability, and lead time – especially for backlights and touch overlays. This guide breaks down the options by model and by failure […]
TL;DR A ProtoTrak LCD replacement from Monitech costs $999 on sale (regularly $1,366) for most MX2/MX3/AGE-series controls and $1,045 for M2/M3-series retrofit kits, with parts in stock and no 6-12 week wait. Most installations take two to four hours and do not require a technician. Your ProtoTrak display is dimming, flickering, or gone dark. You […]
TL;DR A CRT to LCD conversion kit replaces an aging industrial CRT monitor with a modern flat-panel LCD. Most kits include the LCD panel, mounting hardware, and – when the machine outputs a CRT-format video signal – a signal converter called an XVGA box. Choosing between a direct replacement and a universal kit, and knowing […]
TL;DR CRT monitors stopped being manufactured globally around 2007, and the components needed to repair them have been effectively unavailable since around 2010. If your industrial machine still runs a CRT display, it isn’t a question of whether it will eventually need replacing – it’s a question of when. Industrial LCD replacement kits are the […]
Fanuc A61L-0001-0093 LCD Replacement Guide If you are still running a Fanuc CNC system with the original A61L-0001-0093 CRT monitor, you have probably experienced display problems that are becoming harder and more expensive to fix each year. I’ve worked with maintenance teams and machine operators dealing with fading CRTs, unstable images, and increasing downtime caused […]
Tired of Dealing with a Dimming Fagor 8025 CRT? If you’ve been operating a CNC machine with a Fagor 8025 controller, chances are you’ve already dealt with a few headaches — and most of them stem from the old CRT display. Fuzzy images, screen flickering, burn-in, or total display failure are all too common. These […]
Factories were struggling with dying displays and no OEM support. Monitech turned those challenges into 20 years of innovation.
Aging CRT slowing production? Monitech’s drop-in LCD kits deliver instant clarity, zero rewiring, and huge downtime savings for legacy machines.
Imagine this—you’re in the middle of a production run, and suddenly, your PanelView Plus 600 screen flickers, dims, or completely dies. Your machine operators are now flying blind, production slows down, and the clock is ticking on lost revenue. Sound familiar? If you’re an industrial maintenance tech, automation specialist, or plant engineer, you know how […]
When Your Fagor 800T Screen Fails, Every Second Counts If you’re a maintenance engineer, repair technician, or automation specialist, you already know the headache that comes with a failing Fagor 800T CRT screen. ✅ The screen starts flickering…✅ It dims to the point where you’re squinting to read it…✅ Or worse, it dies completely, leaving […]
