Replace Your Worn Fagor 8025 CRT with Monitech’s LCD Upgrade Kit

Tired of Dealing with a Dimming Fagor 8025 CRT?

If you’ve been operating a CNC machine with a Fagor 8025 controller, chances are you’ve already dealt with a few headaches — and most of them stem from the old CRT display. Fuzzy images, screen flickering, burn-in, or total display failure are all too common. These CRTs were durable in their day, but after decades of use, they become a liability rather than an asset.

We’ve seen it all — customers calling in about ghosting images, eye strain from low brightness, and even complete shutdowns that halt production.

But there’s a reliable fix: Monitech’s Fagor 8025 LCD Upgrade Kit.

Common Issues with the Fagor 8025 CRT Controller

• Screen Burn-In: Static display elements permanently etch into the screen
• Flickering Display: Caused by degrading backlight or capacitors in the CRT
• Low Brightness: Hard to read, especially in well-lit environments
• High Energy Consumption: CRTs draw significantly more power than modern LCDs
• Bulky Design: CRT monitors take up more space in tight machine cabinets
• Worn Keypads: The membrane buttons start to wear out or become unresponsive

These issues aren’t just annoying — they interrupt workflows, affect precision, and cost valuable time and money.

The Simple Fix: Monitech’s LCD Upgrade Kit for Fagor 8025

The Fagor 8025 LCD Upgrade Kit with Keypad Overlay from Monitech is a direct replacement for your old CRT unit. This plug-and-play solution eliminates every display issue you’ve been dealing with — while also giving your control panel a much-needed facelift.

Bonus: It also includes a keypad overlay, so if your membrane keys are fading or sticking, this kit takes care of that too.

We also support other models like Fagor 8025T, 8025TS, and 8025TGI with a dedicated upgrade kit.

➡️ View the product here

Why Choose Monitech?

When you upgrade to a Monitech solution, you’re not just buying a screen — you’re getting a full support experience:

• ✅ 1-Year Standard Warranty
• ✅ Knowledgeable, Friendly Tech Support
• ✅ Fast, Reliable Shipping
• ✅ Custom Engineering Options if Needed

We’ve designed this upgrade kit to be 100% compatible with your existing Fagor 8025 system — no rewiring, no programming. Just bolt it in, plug it in, and power on.

Real Case: Back in Production in 30 Minutes

A machine shop in the Midwest recently reached out when their Fagor 8025 M control failed during a busy production week. The CRT went black without warning. Instead of facing downtime or searching for a used CRT (which are nearly extinct), they chose the Monitech LCD Upgrade Kit.

• The kit arrived in two days
• Installation took less than 30 minutes
• The machine was back up the same day — with a sharper, brighter, and more efficient display

The included keypad overlay also fixed an issue they hadn’t even planned to address: the faded and cracked Start and Feed keys. Win-win.

Frequently Asked Questions (FAQ)

Q: Will this upgrade fit my specific Fagor 8025 variant?
A: Yes! We offer compatible kits for:

• Fagor 8025, 8025 GP, 8025 M, 8025 MS, 8025 MG → See product
• Fagor 8025T, 8025TS, 8025TGI → See product

Q: Do I need to modify my control panel?
A: Not at all. It’s a direct drop-in replacement.

Q: What if I’m not sure which model I have?
A: Contact our support team — we’ll help you identify the right kit before you buy.

Q: What happens if I need help during install?
A: Our tech support team is standing by with expert guidance.

Q: Is this really better than repairing my old CRT?
A: Yes. New CRT parts are rare, expensive, and don’t solve the keypad issue. Our kit does both — and uses modern technology.

Need More Than a Display? We’ve Got You Covered

If your Fagor 8025 unit has deeper issues beyond the screen or keypad, check out our Repair Services. We can diagnose and fix problems at the board level — a cost-effective alternative to full replacement.

Looking for something more custom? Our Custom Solutions team can design a unique retrofit or controller modification just for your setup.

Conclusion: Upgrade With Confidence

Replacing your old Fagor 8025 CRT doesn’t have to be complicated. With Monitech’s LCD Upgrade Kit, you’ll gain a modern, crisp display, a refreshed keypad, and the peace of mind that comes with quality tech and expert support.

➡️ Upgrade your Fagor 8025 today:
For Fagor 8025 / GP / M / MS / MG models
For Fagor 8025T / TS / TGI models

Your CNC deserves better than a failing CRT. Let’s bring it back to life — the right way.